BestStand SA182 Sit-to-Stand Lift - 6402
BestStand SA182 Sit-to-Stand Lift
The BestStand SA182 allows the patient to be lifted and transferred safely with minimal physical effort provided by the operator. The SA182 uses an electric actuator to lift patients weighing up to 400 lbs from a sitting to a standing position from either a bed or a chair for transferring. The lift has a standing platform to be used while transferring patients from one surface to another, also included is a cushioned knee pad for additional comfort and support while patient is being transferred. The SA182 has a compact base for maneuvering easily while still providing a wide lifting range. The SA182 comes with the stand assist sling, charger and battery pack.
- Rated at a 400 lb safe working load
- 4-Points Boom
- 4" Rear Caster with Brake
- 3" Dual Front Caster
- Power Control Unit
- Single Piece Molded Kneepad
- Depth Adjustable Kneepad Position
- Hydraulic adjusted legs for ease of use
- Electronic battery operated lift with remote control
| Manufacturer | BestCare |
| Model | SA182 BestStand |
| Safe Working Load | 400 lb |
| Base Ext Width - Closed | 24.9" |
| Mast Height | 40" |
| Base Length | 33.5" |
| Front Caster Height | 4.7" |
| Knee Pad Depth Range | 4" |
| Knee Pad Height Range | 21", 20" or 19" |
| Base Opened Turning Diameter | 45" |
| Base Closed Turning Diameter | 41.9" |
| Footplate Length | 14.4" |
| Footplate Width | 13.9" |
| Battery Pack | 24 VDC 5AH |
| Input Voltage | 220-240VAC 50Hz / 110-120VAC 60Hz |
| Output Voltage | 24VDC |
General Frequently Asked Questions about Used Wheelchair Lifts
Q: Can I use the same lift for my chair and scooter?
A: You can use an AL300 to lift both a scooter and a chair.
Q: Is there any maintenance required for lifts?
A: The only maintenance needed is WD40 on all moving parts once every few months.
Q: How do I know which lift to get for my chair or scooter?
A: Talk to a technician about which lift is right for you and your power chair or scooter. You can also use Harmar’s Compatibility Calculator on Harmar’s website for a more detailed comparison and lift compatibility check.
Q: Can the lift be powered by my existing trailer plug?
A: No, lifts must be powered by a separate electrical harness that attaches directly to the car battery.
Q: Will I still be able to use my backup camera?
A: If you’re getting an outside lift that sits on the back of your vehicle then the camera will be obstructed.
Q: Can I use the swing-away feature while my chair or scooter is still on the lift?
A: You should not swing your lift away while the chair is still on it. It will put too much pressure on the swing away.
Q: What kind of hitch do I need on my vehicle to support the lift?
A: You will either need a Class 3 or Class 2 hitch.
Have any additional questions, comments, or concerns? We’re here to help with your mobility needs! Ask away!